Commercial Air Barrier Accessories
BACK TO HENRY SUPPLIER PAGE (CLICK HERE)
Blueskin Adhesive
Blueskin Adhesive is a quick drying, rubber-based adhesive designed to enhance the adhesion of self-adhered membranes, such as Blueskin SA
- Quick setting
- Aggressive tack provides for superior adhesion of membrane
- Suitable for application at normal and low temperatures
- Easily applied
Product Data Sheet
Safety Data Sheet
Blueskin® Butyl Flash
Blueskin® Butyl Flash is a self-adhered flashing consisting of a synthetic butyl compound which is integrally laminated to a white engineered polypropylene film surface. The flashing is specifically designed to be self-adhered to a prepared substrate.
Henry/Bakor Blueskin TWF
Henry/Bakor Blueskin TWF is a self-adhered membrane consisting of an SBS rubberized asphalt compound, which is integrally laminated to a yellow cross-laminated polyethylene film. The membrane is specifically designed for use as a thru-wall flashing.
Blueskin Spray Prep
Blueskin Spray Prep is a rubber-based spray adhesive designed to enhance the adhesion of Blueskin membranes.
Henry 573 Blueskin LVC Spray Primer
Henry 573 Blueskin LVC Spray Primer is a quick drying, low VOC (Volatile Organic Compound), rubber-based primer. It is designed to enhance the bond of peel and stick air barriers and waterproofing membranes, and also to bond system accessories, such as drain board, filter fabric, and polystyrene to masonry, concrete, wood, gypsum board, DensGlass® sheathing, and metal surfaces. It contains no chlorinated solvents and offers an excellent alternative to methylene chloride-based products. Henry 573 Blueskin LVC Spray Primer is the surface preparation of choice on above and below grade applications where a quick setting, aggressive tack, is required.
Product Data Sheet
Safety Data Sheet
Aquatac Primer
Aquatac Primer is a polymer emulsion based primer for self-adhesive membranes.
- Quick drying
- Environmentally friendly due to low VOC content
- Highly tacky film provides positive adhesion to membrane
- Non-flammable during application
- Easily applied by spray
- Water based, no solvent odors
- Specially designed to provide a high level of tack on vertical surfaces
Henry® Air-Bloc® LF
Henry® Air-Bloc® LF is a moisture cure single-component elastomeric liquid-applied flashing using a highly advanced Silyl-Terminated Polyether (STPE) polymer. It is designed to cure through reaction with airborne moisture to provide a heavy-duty, seamless, rubber-like impervious membrane with excellent weathering and water resistance.
Henry® 925 BES Sealant
Henry® 925 BES Sealant is a premium, one-part, low VOC, moisture cure, building envelope sealant for construction joints subject to dynamic joint movement.
Blueskin WB Window and Door Flashing
Blueskin WB Window and Door Flashing is a self-adhering membrane consisting of an SBS rubberized asphalt compound, which is integrally laminated to a blue-engineered film. The membrane is specifically designed to be self-adhered to a prepared substrate.
Henry 574 Blueskin® LVC Adhesive
Henry 574 Blueskin® LVC Adhesive is a quick drying, lower volatile organic compound (VOC) formulation, rubber-based adhesive designed to enhance the adhesion of self-adhesive membranes such as Blueskin®. Used as an adhesive for self-adhesive membranes such as Blueskin SA, SALT, TWF, VP and WP200 when applied to masonry, concrete, wood, gypsum board, DensGlass™ Gold and metal surfaces. Blueskin LVC Adhesive is the surface preparation of choice on above-grade applications of self-adhered membranes where a quick setting, aggressive tack, solvent-based, lower VOC primer is required.
Hi-Tac™ Primer
Hi-Tac™ is a rubber-based construction adhesive and primer for self-adhesive membranes, such as Blueskin® SA, Blueskin® WP 200 or Blueskin® ROOF RF 200, Blueskin® ROOF PE200HT, and Blueskin® Weather Barrier. Hi-Tac™ is the primer of choice when these products are applied to insulated concrete forms (ICF), masonry, concrete, wood, gypsum board, DensGlass Gold®, polystyrene, and metal surfaces.
Additionally, Hi-Tac Adhesive is used as a construction adhesive in exterior applications for bonding porous materials, such as low to medium density insulation to masonry, concrete, wood, gypsum board, DensGlass Gold® and metal surfaces. It also can be used to adhere laps of polyethylene sheets and housewraps to one another. Designed for applications above -12°C.
230-21 Rigid Insulation Adhesive and Vapour Barrier
A trowel-consistency, synthetic rubber-based insulation adhesive. It is a solvent-type, smooth-spreading adhesive that can be applied at temperatures down to minus 12°C (10°F). It has high initial strength and sets rapidly to give a strong, resilient bond. Complies with CGSB 71-GP-24M, Type II.
Polybitume 570-05
Polybitume 570-05 is a top-quality, high solids, rubber asphalt caulking and sealing compound formulated to provide extra flexibility and a good bond. It exceeds the performance standards of asphalt caulking compounds.
Kop-R-Lastic® Sealant
Kop-R-Lastic® Sealant is a one-part, highly elastic, high-performance thermoplastic sealant. The sealant exhibits excellent adhesion to a variety of construction materials. It can be applied to wet or dry surfaces and has excellent low temperature flexibility. It is non-staining, non-sagging and skins over, tack free within 30 minutes.
Product Data Sheet
Safety Data Sheet
BACK TO HENRY SUPPLIER PAGE (CLICK HERE)