Commercial Water Resistive Air Barriers
BACK TO HENRY SUPPLIER PAGE (CLICK HERE)
Henry® Blueskin® SA
Henry® Blueskin® SA is a self-adhered water resistive air barrier consisting of an SBS rubberized asphalt compound laminated on a blue polyethylene film surface. Impermeable to air, moisture vapour and water, Blueskin® SA is designed to install easily on a variety of prepared substrates.
Similar to Blueskin® SA, Blueskin® SA LT is formulated specifically for low-temperature application.
Product Data Sheet
Safety Data Sheet
Henry® Blueskin® Metal Clad®
Henry® Blueskin® Metal Clad® is a self-adhered water resistive air barrier membrane comprised of rubberized asphalt and dual-layers of high strength polyethylene with surface layer of metallic aluminum film. Due to its metallic surfacing, Blueskin Metal Clad exhibits excellent weathering resistance when applied to above-grade wall assemblies. This vapour impermeable membrane is available in various roll widths for both membrane and flashing applications and has a removable release liner for ease of installation.
Product Data Sheet
Safety Data Sheet
Henry FOILSKIN
Henry FOILSKIN are self-adhering weather barrier membranes consisting of an SBS rubberized asphalt compound. Integrally laminated to a white, UV resistant foil/composite film, FOILSKIN is specially designed to be self-adhered to a prepared substrate, providing a durable air, vapor and weather barrier.
FOILSKIN is integrally laminated to a glass scrim reinforced aluminum foil. The membrane is specifically designed to be self-adhered to a prepared substrate, providing a weather barrier.
Product Data Sheet
Safety Data Sheet
Henry® Blueskin® VP160
Henry® Blueskin® VP160 is a self-adhered vapour permeable, water resistive air barrier consisting of an engineered film and a patented, permeable adhesive technology with split-back poly-release film. Blueskin® VP160 is fully adhered to the wall substrates in a weatherboard method without mechanical attachment.
- Meets highest industry standards for commercial air barriers
- Sheds water while allowing vapour to pass through allowing walls to drain and substrates to dry
- Creates a continuous plane of air-tightness helping to improve building thermal performance
- Fully adheres to substrates eliminating water migration
Air-Bloc® 21
Air-Bloc® 21 is a trowel consistency, solvent-type, synthetic rubber-based insulation adhesive formulated for easy application on a range of construction surfaces.
Air-Bloc® 21 is designed to provide an effective air and vapor barrier when used as a full bed adhesive in conjunction with rigid foam or semi-rigid paper-faced insulation. Also available as a fire-resistive air and vapor barrier, Air-Bloc® 21FR is used as a full bed adhesive in conjunction with rigid foam or semi-rigid paper-faced insulation.
Product Data Sheet
Safety Data Sheet
Air-Bloc® 16MR
Henry Air-Bloc 16MR is a fluid-applied, vapor-impermeable air and water barrier when applied to above-grade wall assemblies. It is single-component, water-based, and cures to a tough monolithic rubber-like membrane, which resists air leakage and water penetration.
Henry’s Air-Bloc® 17MR
Liquid-applied by roller, brush or spray, Henry’s Air-Bloc® 17MR is a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces and can be applied down to 20°F (-6°C). Air-Bloc® 17MR cures to a tough, monolithic rubber-like membrane.
Vapor-Bloc® SA
Vapor-Bloc® SA is a self-adhered vapour barrier membrane consisting of an SBS rubberized asphalt compound which is integrally laminated to a blue cross-laminated polyethylene film. The membrane is specifically designed to be self-adhered to a prepared substrate. Ideal application surfaces include steel decks, gypsum board and plywood or certain insulation panels prior to the application of finished roof coverings. The main function of Vapor-Bloc¨ SA is to serve as a full coverage vapour barrier and secondary waterproofing layer in the composition of roof assemblies.
- 48” wide roll provides increased coverage over steel decks
- SBS modified membrane can be applied in temperatures as low as –12°C
- Excellent adhesion to prepared substrates of steel decks, gypsum board, concrete, plywood
- Excellent compatibility with Bakor adhesives and air barrier membranes
- Self adhesive, no flame required
Henry® Air-Bloc® All Weather STPE™
A vapor permeable membrane with long-term UV resistance, Henry® Air-Bloc® All Weather STPE™ is a single-component, moisture cure Silyl Terminated Polyether (STPE) water-resistive air barrier. Featuring a high solids content and quick cure time, Air-Bloc® All Weather STPE™ can be applied with rain in the forecast, helping to reduce job-site weather delays. Its hydrophobic nature also means it won’t wash off in the rain. Plus, it can be spray-, roller- or brush-applied. Air-Bloc® All Weather STPE™ is part of the Air-Bloc® portfolio of fluid applied air barriers within the Henry® Building Envelope Systems® family.
Henry/Bakor Air-Bloc® 31MR
Liquid-applied with a trowel or spray, Henry/Bakor Air-Bloc® 31MR is a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces. Air-Bloc® 31MR cures to a tough, monolithic rubber-like membrane.
Henry/Bakor Air-Bloc® 33MR
Henry/Bakor Air-Bloc® 33MR is a UV-resistant, one-component, elastomeric membrane that provides an air barrier on a range of construction surfaces. Liquid-applied with a trowel or spray, Air-Bloc® 33MR cures to a tough, monolithic rubber-like membrane that resists air leakage along with UV radiation and weather.
BACK TO HENRY SUPPLIER PAGE (CLICK HERE)