Waterproofing Systems
BACK TO HENRY SUPPLIER PAGE (CLICK HERE)
Henry® Pumadeq™ System
Henry® Pumadeq™ System is a cold fluid-applied, seamless, monolithic waterproofing solution. It uses PUMA technology which combines Methyl Methacrylates with Polyurethanes for exceptional long-term performance and durability. Henry® Pumadeq™ is a UV-resistant waterproofing system that sets in 30 minutes and can withstand traffic one hour after installation. The result is a more durable, flexible and longer-lasting waterproofing solution that provides superior low temperature crack bridging.
Blueskin® WP 200
Blueskin® WP 200 is a self-adhering composite membrane consisting of an SBS rubberized asphalt compound, integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed for self-adhering to a prepared substrate, and provides a high-performance waterproofing barrier.
Henry/Bakor CM100
Henry/Bakor CM100 is a fast curing, one component elastomeric, solvent-free, moisture cure waterproofing compound. It provides a cold alternative to hot applied rubberized membrane systems or replace conventional hot mop, felt ply and/or pre-formed sheeting systems. Henry/Bakor CM100 is applied in a high build two-ply system or single-ply application, which cures through reaction with airborne moisture to provide a heavy-duty “seamless” rubber-like, impervious membrane.
790-11 Hot Rubberized Asphalt
Henry’s time-tested 790-11 hot rubberized, fluid asphalt is formulated to provide a monolithic, fully bonded roofing and waterproofing membrane used in both intensive and extensive vegetative roofing assemblies. It is hot poured in a single or fabric reinforced application, providing a seamless membrane that seals small cracks and crevices.
Henry’s 790-11 is composed of a specially selected blend of refined asphalts, synthetic rubber and mineral stabilizers. It is modified with additives to promote adhesion and improve low temperature flexibility.
Henry also offers an environmentally friendly 790-11 hot rubberized asphalt that contains at least 25% post consumer recycled content.
Aqua-Bloc 770-06
Aqua-Bloc 770-06 Elastomeric Liquid Membrane is a one component elastomeric waterproofing membrane. It is applied in a single or reinforced application and cures through solvent evaporation to provide a heavy-duty, seamless, rubber-like, impervious membrane. Aqua-Bloc 770-06 can be trowel or spray applied.
Aqua-Bloc 720-38
Aqua-Bloc 720-38 Elastomeric Asphalt Emulsion Waterproofing is an elastomeric, liquid-applied, emulsified asphalt membrane. It is designed for below grade waterproofing of foundation walls and other structures. Aqua-Bloc 720-38 complies with, and exceeds, the requirements of CAN/CGSB 37.2.
Aqua-Bloc 720-33
Aqua-Bloc 720-33 Elastomeric Asphalt Emulsion Waterproofing is a “quick-setting” elastomeric, emulsified asphalt membrane designed for waterproofing foundations walls made of concrete, concrete block or ICF (insulated concrete forms). Aqua-Bloc 720-33 is applied with suitable spray equipment and a setting agent to achieve an immediate set through. Complies with, and exceeds, the requirements of CAN/CGSB 37.1M.
Thermoseal
Thermoseal is used as a single ply waterproofing membrane for bridge decks, foundations, tunnels, wet rooms and plaza decks.
- Asphaltic Pavement can be applied directly over Thermoseal without additional protection course
- Polyester reinforced for high strength and flexibility at all temperatures
- Excellent tear resistance
- Torch grade membrane
- Waterproofing membrane
BLUE SEAL™ – I.C.F. and Concrete Construction
Blue Seal™ is a one-step, liquid-applied, water-based waterproofing membrane for exterior foundation walls. Its ready-to-use formulation combines the features of a sealer, and an elastomeric waterproofing membrane based on ETV copolymer rubber. BLUE SEAL’s high solids content and soft creamy consistency make it effective for waterproofing and sealing concrete, polystyrene insulation board, foam insulation, Insulated Concrete Forms (I.C.F.), wood and other common surfaces.
Blue Seal™ cures to a seamless, non-deteriorating rubber membrane that allows for expansion and contraction over a wide range of temperatures. It can easily bridge cracks up to 1.5 mm (1/16”). Blue Seal™ is V.O.C. compliant and does not contain any volatile or harmful solvents, eliminating health and environmental considerations during application. Blue Seal™ is non-toxic through the use of advanced polymer technology, allowing for simple, safe application and easy clean up.
BACK TO HENRY SUPPLIER PAGE (CLICK HERE)